滿額折
Third Harmonic Utilization in Permanent Magnet Machines
- ISBN13：9789811306280
- 出版社：Springer Nature
- 作者：Kai Wang; Ziqiang Zhu
- 裝訂：精裝
- 規格：23.5cm*15.5cm (高/寬)
- 出版日：2018/09/17
定 價：NT$ 7650 元
若需訂購本書，請電洽客服 02-25006600[分機130、131]。
相關商品
商品簡介
作者簡介
商品簡介
This book investigates the utilization of harmonics in the permanent magnet (PM) or rotor shape to improve the torque density of PM brushless AC machines including three-phase inner rotor and outer rotor machines, five-phase machines, dual three-phase machines, linear machines, by means of analytical, finite element analyses, and as well as experimental validation.
The torque density can be improved while the torque ripple remains low in PM shaping utilizing the 3rd harmonic. In this book, the analytical expression of output torque is derived for PM machines with rotor shape using the 3rd harmonic, and then the optimal 3rd harmonic for maximizing torque is analytically obtained.
The book compares the PM shape in surface-mounted PM (SPM) machines and the rotor lamination shape in interior PM (IPM) machines utilizing the 3rd harmonic, and it becomes clear that their shaping methods and amount of torque improvement are different.
In a five-phase PM machine, the 3rd harmonic can be utilized in both the current waveform and PM shapes to further improve the output torque. For the dual three-phase SPM machines without deteriorating the torque more than 30% when the optimal 3rd harmonic into both the current and PM shape are injected.
The harmonics in airgap flux density have significant influence on the cogging torque, stator iron flux distribution, and radial force between the rotor and stator. These effects has been investigated as well in this book.
作者簡介
For internal use only:
Professional Experience
2015-present Professor, Phd supervisor
Nanjing University of Aeronautics and Astronautics
2014-2015 Research and Development Engineer, Ansys Inc., PA, USA
2013-2014 Research associate Siemens Sheffield University Wind Power Research Centre, UK
2010-2013 Research associate, Sheffield University, UK
2009-2010 Post-doctoral researcher, Memorial University, Newfoundland, Canada
EDUCATION
2010-2013 Ph.D in Electrical Engineering, Sheffield University, UK
2004-2009 Ph.D in Electrical Engineering, Zhejiang University, Hangzhou, China.
2000-2004 B.S. in Automation, China Jiliang University, Hangzhou, China
EXPERIENC
2014-2015 Co-simulation between Maxwell and Matlab
2013-2014 PM machine design for wind power
2010-2013 PM machine design for high performance EPS applications
Demonstrator for the undergraduate student in Sheffield University
2009-2010 High efficiency line-start PM motor design and IPM generator design for wind power
2007-2009 Inverter and DSP controller for high speed sensorless control systems. Technical support of MagneForce motor design software
2007.7-2007.9 Internship position of PM motor design in TECO
2006-2007 Optimization and development of high-speed sensorless permanent magnet motors
2005-2006 Finite element analysis of three-dimension artificial heart pump motor PM machine design for high performance EPS applications
Serial DC motor design for electrical machine tools (Bosch Company)
2004-2005 Optimization design of high speed generator for micro-gas turbine
AWARDS AND ORGANIZATION
2014-present IEEE Senior member
2012 Best paper awards in international conference and exhibition on ecological vehicles and renewable energy
2009-2010 Excellent plan for Ph.D thesis of Zhejiang Univeristy Excellent graduate student of Zhejiang University
2007-2008 First-Class Scholarship for Excellent Student of Zhejiang University
“TECO” Enterprise Scholarship of Zhejiang University
“MPS” Enterprise Scholarship of Zhejiang University
“Wang Guosong” Scholarship of Zhejiang University
Award of Excellent Leadership of Graduate Student of ZhejiangUniversity Award for paper published on Journal of Applied Physics
2000-2004 Excellent Graduate Student of China Jiliang University
First-Class Scholarship for Excellent Student of China Jiliang University (4 times)
您曾經瀏覽過的商品
購物須知
外文書商品之書封，為出版社提供之樣本。實際出貨商品，以出版社所提供之現有版本為主。部份書籍，因出版社供應狀況特殊，匯率將依實際狀況做調整。
無庫存之商品，在您完成訂單程序之後，將以空運的方式為你下單調貨。為了縮短等待的時間，建議您將外文書與其他商品分開下單，以獲得最快的取貨速度，平均調貨時間為1~2個月。
為了保護您的權益，「三民網路書店」提供會員七日商品鑑賞期(收到商品為起始日)。
若要辦理退貨，請在商品鑑賞期內寄回，且商品必須是全新狀態與完整包裝(商品、附件、發票、隨貨贈品等)否則恕不接受退貨。