極端條件下結構完整性與材料老化（簡體書）

《極端條件下結構完整性與材料老化(英文版)》內容簡介：Copyright and Reprint Permission: All right are reserved. No part of this publication may be reproduced, stored in as retrieval system, or transmitted in any means, electronic, mechanical, photo-copying or otherwise, without the prior permission of East China University of Science and Technology Press and Editors, S.T. Tu, Z.D. Wang and G.C. Sih. The chapters are reproduced with permission from the individual authors.

Preface
Greener and higher energy efficiency for materials and structural systems sustaining against
aggressive environment
Consideration of material aging properties in longer-term failure predictions of cracked components
Coupling effect of creep deformation and internal stress on scale growth under the applied bending
Residual stresses in welded nuclear power components
Current research topics for nondestructive reliability evaluation in NIMS
Relaxation of residual stresses and grain boundary fracture in 316H stainless steel
Effects of service cycles on the microstructure and tensile property of K4648 superalloy
Characterization of mechanical properties of HP40Nb using indentation creep test
Experimental study on the mechanical properties of HI 3-TIC composite coatings
Experimental study on creep-ratcheting-fatigue interaction of SS304 stainless steel at room and high temperatures
High-temperature corrosion-resistance property of Fe-A1/Cr3C2RE composite coatings produced by HVFS
Comparison of ductile-to-brittle transition curve fitting approaches
Microstructure and intergranular corrosion of 316L stainless steel diffusion bonded joint
Accelerated pitting corrosion of welded SUS304 under freezing and thawing corrosive environment
Kazunori Ishitsuka, Junichi Shibano, Tsuyoshi Takahashi, Setsuo Miura, Michiaki Kobayashi
Bending fretting fatigue damages of 316L anstenitic stainless steel plates against 52100 steel cylinders
Stress corrosion crack study of 304 and 316L stainless steel in dye solution
Corrosion resistance of 321 stainless steel in high-temperature naphthenic acid
Research on anisotropy properties of A350 pressure vessel steel forging by small punch test
Prediction methodology of stress relaxation performance based on continuum damage mechanics
Strengthened with carbon fiber sheets and its implementation
Failure analysis of 20G boiler tubes
A study on the plasma treatment effect carbon fibers on the wear properties of carbon/epoxy woven composites
Relationship between elevated strength and brazing parameters of Inconel Superalloy vacuum
brazed joints
Temperature rise rate of steam turbine at cold-state start-up considering the hardness changes of
rotor materials
Effect of solid solution treatment on microstructure and properties of 0Crl 8Ni9 Austenite stainless
steel butt-welding pipe fittings
The influence of tensile stress on the magnetic memory signals of Q345R steel
Fracture mechanism of low cycle fatigue of 30CrlMolV steel at different loading rates
Determination of mode I fracture toughness, Gic, of dispersion improved clay/epoxy nanocomposites
Analysis of fracture property for beam-column connections of steel frame with cracks
Free vibration analysis of thin rectangular cracked plate with four free edges on nonlinear elastic foundation
Failure mechanism of inconel 718 at elevated temperature
Damage tolerance assessment and test verification for an aeroengine crankcase
Thermal damage of cementitious materials: an elasto-plastic damage model for plain concrete
subjected to high temperatures
Two-step damage identification approach for a multi-layer concrete frame structure based on wavelet
analysis and BP neural network
3-D numerical of simulation of concrete failure process based on dynamic damage
Quantitative characterization and analysis of creep constraint induced by specimen thicknesses in
compact tension specimens
Experimental study on residual fatigue life for a nickel-based powder metallurgy superalloy
Fatigue crack growth behavior in stainless steel under cyclic torsion
A numerical method to simulate ductile failure of tensile plates with interacting through-wall cracks
Numerical simulation of crack propagation and coalescence in plates under creep conditions
Research on effect of anti-vibration bars on dynamic characteristic of U-tubes in steam generator
Fatigue-cracking representation and its evolution for spherical contacts
Prediction of creep life in terms of dissipated power
Study on imit load and safety assessment method for pressure pipe with an internal pit at high temperature
Evaluating residual stress behaviour in 316H stainless steel using neutron diffraction
Limit loads for part-through surface axially cracked elbows under internal pressure
Safety assessment of pipes with multiple local wall thinning defects under bending moment~
Effect of the applied torque on the PEM fuel cell performance
Contact resistance and contact behavior prediction between the bipolar plate and the GDL in a proton exchange membrane fuel cell
A new form of strain gradient elasticity
Structure strength and safety analysis of CO2 stripper with large opening under vertical position
Reinforcement of pressure vessels with large opening
Finite element analysis on welding residual stresses of T-joint
Finite element analysis on the contact stress of automotive water pump beating s seal
Numerical investigating the effect of braze processing parameters on residual stresses in an X-type
lattice truss sandwich structure
Numerical simulation of electromigration failure in IC interconnect structures
Numerical simulation and structure optimization of coal-liquefying reactor
FEA analyses under tension and bending fretting fatigue modes
Finite element stress analysis of semi-trailer liquefied petroleum gas tanker
Analysis of uneven settlement effects on the widened bridge
Identification of structural parameters by the weighted least square method based on wavelet packet transform
Study on the non-probabilistic interval reliability of pressure pipe containing defects
A new DEM for interaction between adjacent RC membrane structures
A new method for assessment of spurious trip in safety instrumented system
On-line monitoring of high-temperature piping by strain sensing units
Simulation of inclusion shape change in steel strips during cold rolling
A method of assessing power-law creep constants using small punch creep test in high temperature components
Ratcheting analysis of pressurized piping with pit defects
Author index
Keywords index