PROCESS CONTROL - A PRACTICAL APPROACH
商品資訊
ISBN13：9780470975879
出版社：JOHN WILEY & SONS;LTD
作者：KING
出版日：2010/12/31
裝訂／頁數：精裝／416頁
商品簡介
Split into two parts, the first covers generic process control techniques, assuming education in mathematics to high school level. The second part of this title is process-specific and requires degree-level knowledge or the equivalent learnt through experience working with the technologies.
This book is progressive and is an introductory, advanced and specialist source of information.
Key features:
- Meets the needs of the process industry, and closes the gap between theory and practice
- Back-to-basics approach, with only the essential mathematics, and a focus on techniques that have an immediate practical application
- Written by an experienced practitioner, highly regarded by major corporations, with over 25 years experience in teaching industry courses
作者簡介
About the Author
Myke King is the Director of Whitehouse Consulting, UK, an independent consulting organisation specialising in process control.
目次
About the Author.
1. Introduction.
2. Process Dynamics.
2.1 Definition.
2.2 Cascade Control.
2.3 Model Identification.
2.4 Integrating Processes.
2.5 Other Types of Process.
2.6 Robustness.
2.7 Laplace Transforms for Processes.
References.
3. PID Algorithm.
3.1 Definitions.
3.2 Proportional Action.
3.3 Integral Action.
3.4 Derivative Action.
3.5 Versions of Control Algorithm.
3.6 Interactive PID Controller.
3.7 Proportional-on-PV Controller.
3.8 Nonstandard Algorithms.
3.9 Tuning.
3.10 Ziegler-Nichols Tuning Method.
3.11 Cohen-Coon Tuning Method.
3.12 Tuning Based on Penalty Functions.
3.13 Manipulated Variable Overshoot.
3.14 Lambda Tuning Method.
3.15 IMC Tuning Method.
3.16 Choice of Tuning Method.
3.17 Suggested Tuning Method for Self-Regulating Processes.
3.18 Tuning for Load Changes.
3.19 Tuning for Unconstrained MV Overshoot.
3.20 PI Tuning Compared to PID Tuning.
3.21 Tuning for Large Scan Interval.
3.22 Suggested Tuning Method for Integrating Processes.
3.23 Implementation of Tuning.
3.24 Loop Gain.
3.25 Adaptive Tuning.
3.26 Initialisation.
3.27 Anti-Reset Windup.
3.28 On-Off Control.
3.29 Laplace Transforms for Controllers.
3.30 Direct Synthesis.
References.
4. Level Control.
4.1 Use of Cascade Control.
4.2 Parameters Required for Tuning Calculations.
4.3 Tight Level Control.
4.4 Averaging Level Control.
4.5 Error-Squared Controller.
4.6 Gap Controller.
4.7 Impact of Noise on Averaging Control.
4.8 General Approach to Tuning.
4.9 Three-Element Level Control.
5. Signal Conditioning.
5.1 Instrument Linearisation.
5.2 Process Linearisation.
5.3 Constraint Conditioning.
5.4 Pressure Compensation of Distillation Tray Temperature.
5.5 Pressure Compensation of Gas Flow Measurement.
5.6 Filtering.
5.7 Exponential Filter.
5.8 Higher Order Filters.
5.9 Nonlinear Exponential Filter.
5.10 Averaging Filter.
5.11 Least Squares Filter.
5.12 Control Valve Characterisation.
5.13 Equal Percentage Valve.
5.14 Split-Range Valves.
6. Feedforward Control.
6.1 Ratio Algorithm.
6.2 Bias Algorithm.
6.3 Deadtime and Lead-Lag Algorithms.
6.4 Tuning.
6.5 Laplace Derivation of Dynamic Compensation.
7. Deadtime Compensation.
7.1 Smith Predictor.
7.2 Internal Model Control.
7.3 Dahlin Algorithm.
References.
8. Multivariable Control.
8.1 Constraint Control.
8.2 SISO Constraint Control.
8.3 Signal Selectors.
8.4 Relative Gain Analysis.
8.5 Steady State Decoupling.
8.6 Dynamic Decoupling.
8.7 MVC Principles.
8.8 Parallel Coordinates.
8.9 Enhanced Operator Displays.
8.10 MVC Performance Monitoring.
References.
9. Inferentials and Analysers.
9.1 Inferential Properties.
9.2 Assessing Accuracy.
9.3 Laboratory Update of Inferential.
9.4 Analyser Update of Inferential.
9.5 Monitoring On-stream Analysers.
Reference.
10. Combustion Control.
10.1 Fuel Gas Flow Correction.
10.2 Measuring NHV.
10.3 Dual Firing.
10.4 Inlet Temperature Feedforward.
10.5 Fuel Pressure Control.
10.6 Combustion Air Control.
10.7 Boiler Control.
10.8 Fired Heater Pass Balancing.
11. Compressor Control.
11.1 Polytropic Head.
11.2 Flow Control (Turbo-Machines).
11.3 Flow Control (Reciprocating Machines).
11.4 Anti-Surge Control .
12. Distillation Control.
12.1 Key Components.
12.2 Relative Volatility.
12.3 McCabe-Thiele Diagram.
12.4 Cut and Separation.
12.5 Effect of Process Design.
12.6 Basic Controls.
12.7 Pressure Control.
12.8 Level Control.
12.9 Tray Temperature Control.
12.10 Pressure Compensated Temperature.
12.11 Inferentials.
12.12 First-Principle Inferentials.
12.13 Feedforward on Feed Rate.
12.14 Feed Composition Feedforward.
12.15 Feed Enthalpy Feedforward.
12.16 Decoupling.
12.17 Multivariable Control.
12.18 On-stream Analysers.
12.19 Towers with Sidestreams.
12.20 Column Optimisation.
12.21 Optimisation of Column Pressure.
12.22 Energy/Yield Optimisation.
References.
13. APC Project Execution.
13.1 Benefits Study.
13.2 Benefit Estimation for Improved Regulatory Control.
13.3 Benefits of Closed-Loop Real-Time Optimisation.
13.4 Basic Controls.
13.5 Inferentials.
13.6 Organisation.
13.7 Vendor Selection.
13.8 Safety in APC Design.
13.9 Alarms.
References.
Index.
購物須知
外文書商品之書封，為出版社提供之樣本。實際出貨商品，以出版社所提供之現有版本為主。部份書籍，因出版社供應狀況特殊，匯率將依實際狀況做調整。
無庫存之商品，在您完成訂單程序之後，將以空運的方式為你下單調貨。為了縮短等待的時間，建議您將外文書與其他商品分開下單，以獲得最快的取貨速度，平均調貨時間為1~2個月。
為了保護您的權益，「三民網路書店」提供會員七日商品鑑賞期(收到商品為起始日)。
若要辦理退貨，請在商品鑑賞期內寄回，且商品必須是全新狀態與完整包裝(商品、附件、發票、隨貨贈品等)否則恕不接受退貨。