Structural Load Determination ― 2018 Ibc and Asce/Sei 7-16

ISBN13：9781260135626
出版社：McGraw-Hill
作者：David Fanella
出版日：2018/09/14
裝訂／頁數：平裝／564頁
規格：27.9cm*21.6cm*2.5cm (高/寬/厚)
關鍵字： Structural Load Determination ― 2018 Ibc and Asce/Sei 7-16、 Structural、 Load、 Determination、 2018、 Ibc、 and、 Asce、 Sei、 16、 McGraw-Hill、 David Fanella、外文書、自然科普、科技與工程、 Civil engineering、

杜威圖書分類

：

Civil engineering

定價

：NT$ 6728 元

若需訂購本書，請電洽客服 02-25006600[分機130、131]。

無法訂購

商品簡介

作者簡介

商品簡介

Discover how to calculate structural loads within the context of 2018 IBC and ASCE/SEI 7-16 requirements

This practical guide shows, step by step, how to apply the provisions of the 2018 IBC and ASCE/SEI 7-16 to accurately determine structural loads. The book contains information engineers need to design buildings that will withstand the forces of gravity, occupancy, and environmental stress. You will get design examples, flowcharts, and load diagrams that illustrate complex load provisions.

Structural Load Determination Under 2018 IBC and ASCE/SEI 7-16 opens with an introduction to structural loads and a discussion of the relationship between the IBC and ASCE 7 standards. From there, the book explains the proper application of allowable stress design (ASD), load resistance factor design (LRFD), and seismic load combinations. Subsequent chapters cover occupancy, roof, rain, snow, ice, wind, seismic, and tsunami loads. Throughout, emphasis is placed on the proper application of load provisions within the scope of everyday practice.

• Clearly explains the complex load provisions found in the 2018 IBC and in ASCE/SEI 7-16

• Shows how to calculate dead loads, occupancy live loads, roof live loads, and environmental loads

• Written by an experienced structural engineer in conjunction with the ICC

作者簡介

David A. Fanella, Ph.D., S.E., P.E., F.ASCE, is Senior Director of Engineering at the Concrete Reinforcing Steel Institute (CRSI). He has 30 years of experience in the design of a wide variety of buildings and other structures. Dr. Fanella has authored numerous technical publications and recently authored the Second Edition of Reinforced Concrete Structures: Analysis and Design, published by McGraw-Hill.He is a member of numerous America Concrete Institute (ACI) committees, he will serve as a member of the ASCE/SEI Committee 7, Minimum Design Loads and Associated Criteria for Buildings and Other Structures for the 2022 edition, , and is a past board member and president of the Structural Engineers Association of Illinois.

主題書展