Mini-lathe Tools and Projects
商品資訊
系列名：Workshop Practice Series
ISBN13：9781854862655
出版社：Special Interest Model Books
作者：David Fenner
出版日：2011/11/07
裝訂／頁數：平裝／126頁
規格：21.1cm (高)
商品簡介
This book follows on from the same author’s introduction to the Mini-Lathe (Workshop Practice Series No. 43) and presents a series of projects which are intended to extend the versatility of this little machine. In some cases, additional machining capacity will be required, which some readers may find at their local model engineering club.
The book covers the Mark 2 Mini-Lathe, and specific tools such as the radius turning attachment, the tailstock and the dividing head, and includes techniques such as taper turning and knurling.
Whilst specifically written for the Mini-Lathe, some of the projects in this book can equally be applied to other small model engineering lathes and in many cases the concepts can be scaled to suit other equipment.
購物須知
外文書商品之書封，為出版社提供之樣本。實際出貨商品，以出版社所提供之現有版本為主。部份書籍，因出版社供應狀況特殊，匯率將依實際狀況做調整。
無庫存之商品，在您完成訂單程序之後，將以空運的方式為你下單調貨。為了縮短等待的時間，建議您將外文書與其他商品分開下單，以獲得最快的取貨速度，平均調貨時間為1~2個月。
為了保護您的權益，「三民網路書店」提供會員七日商品鑑賞期(收到商品為起始日)。
若要辦理退貨，請在商品鑑賞期內寄回，且商品必須是全新狀態與完整包裝(商品、附件、發票、隨貨贈品等)否則恕不接受退貨。