Mechanics of Fretting and Fretting Fatigue
商品資訊
ISBN13：9783030707453
出版社：Springer Nature
作者：David a. Hills
出版日：2021/05/09
裝訂：精裝
商品簡介
1 Some Fundamentals
1.1 Fretting in Practice
1.2 Basics, Equilibrium and 'Coupling'1.3 Friction
1.4 Contact Requirements
1.5 Classes of Contact1.6 Methods of Solution
1.7 Shakedown
1.8 Three Dimensional Aspects
2 Plane Elasticity and Half-Plane Contacts
2.1 Airy Stress Functions and the Half-Plane2.2 Integral Equation Formulation
2.3 Solution
2.3.1 Cauchy Equations of the First Kind2.3.2 Cauchy Equations of the Second Kind
2.3.3 Numerical Solutions
2.4 Mossakovskii-Barber Procedure2.4.1 Normal Loading Problem
2.4.2 Application of a Shear Force
2.4.3 Influence of Bulk Tension2.4.4 Application of a Moment
2.5 Solutions Based on Dislocations
2.6 Summary
3 Williams' Solution
3.1 Introduction
3.2 Antiplane Loading
3.3 General Loading
3.4 Crack Tip and Incomplete Contact Edge Solution
3.5 Bonded Wedges
3.6 Sliding Wedges
4 Half Plane Partial Slip Contact Problems
4.1 Introduction
4.2 The Normal Load Problem for Asymmetrical Contacts4.3 The Sequence of Loading
4.3.1 Sequential Loading (Constant Normal Load)
4.3.2 Proportional Loading
4.3.3 Two-Stage Proportional Loading
4.3.4 Application to a Hertzian Geometry
4.4 The Effect of Differential Bulk Tension
4.4.1 Tangential Load and Moderate Differential Bulk Tension
4.4.2 Bulk Tension Dominated Partial Slip Problems
4.5 Periodic Loading
4.6 More General Loading Scenarios
4.7 General Cyclic Proportional Loading
4.7.1 The Permanent Stick Zone
4.7.2 Mapping between the Normal and Tangential Problems
4.7.3 Example - Tilted Wedge
4.8 Partial Slip Solutions Based on Dislocations
4.8.1 Glide Dislocation Solutions
4.8.2 Example Problem - Cattaneo-Mindlin Problem
4.8.3 Large Bulk Tension Problems
4.9 Antiplane Loading
5 Complete Contacts and their Behaviour
5.1 General Frictional Response - square contacting element
5.2 Finite Slip Zones5.3 Cracks at Contact Edges
5.4 References
6 Representation of Half-plane Contact Edge Behaviour by Asymptotes
6.1 Introduction
6.2 Basic Solution
6.3 Partial Slip: constant normal load
6.4 Partial Slip: varying normal load .
6.5 References
7 Crack Propagation, Nucleation and Nucleation Modelling
7.1 Introduction
7.2 Notch and Critical Distance Methods
7.3 Critical Plane Methods7.4 Short Crack Methods
7.5 Wear and Corrosion
8 Experiments to Measure Fretting Fatigue Strength
8.1 Fundamental and Historic Considerations
8.2 Single Actuator Experimental Apparatus
8.3 Two Actuator Experimental Apparatus8.4 Further Developments
8.5 Concluding Remarks
您曾經瀏覽過的商品
購物須知
外文書商品之書封，為出版社提供之樣本。實際出貨商品，以出版社所提供之現有版本為主。部份書籍，因出版社供應狀況特殊，匯率將依實際狀況做調整。
無庫存之商品，在您完成訂單程序之後，將以空運的方式為你下單調貨。為了縮短等待的時間，建議您將外文書與其他商品分開下單，以獲得最快的取貨速度，平均調貨時間為1~2個月。
為了保護您的權益，「三民網路書店」提供會員七日商品鑑賞期(收到商品為起始日)。
若要辦理退貨，請在商品鑑賞期內寄回，且商品必須是全新狀態與完整包裝(商品、附件、發票、隨貨贈品等)否則恕不接受退貨。