1．Direct Observation of Lubrication Behavior
1.1 Direct Observation in Drawing between Flat Dies
1.2 Direct Observation in Sheet Drawing
1.3 Lubro 3D Measurement of Oil Film Thickness of Interface2．Friction Behavior in Drawing between Flat Dies
2.1 New Tribo-Simulator Controlled by Computer
2.2 Effect of Lubricant Viscosity and Additive on Coefficient of Friction2.3 Effect of Yield Stress on Coefficient of Friction
2.4 Effect of Bulk Deformation of Specimen on Coefficient of Friction
2.5 Effect of Back Tension on Coefficient of Friction
3. Friction Behavior in Flat Sliding
3.1 Apparatus and Characteristic of Flat Sliding
3.2 Effect of Surface Topography on Coefficient of Friction of Steel Sheet
3.3 Effect of Contact Length on Coefficient of Friction of Steel Sheet
3.4 Friction Behavior in Flat Sliding of Plated Steel Sheet
4．Friction Behavior in Repeatedly Flat Sliding
4.1 Apparatus and the Characteristic
4.2 Effect of Yield Stress on Coefficient of Friction
4.3 Friction Behavior of Repeatedly Flat Sliding of Plated Steel Sheet
5．Friction Behavior in Tension-Bending
5.1 Surface Behavior of Specimen with Smooth Surface in Sliding under Tension-Bending
5.2 Surface Behavior of Specimen with Dull Surface in Sliding under Tension-Bending
5.3 Direct Observation of Micro-Contact Behavior at Interface in Sliding under Tension-Bending
6．Friction Behaviors in Ironing
6.1 Coefficient of Friction by Fundamental Tribo-Simulator
6.2 Coefficient of Friction of Commercial Oil by New Tribo-Simulator
7．FEM Analysis in Friction Behavior in Deep Drawing
7.1 Measurement of Punch Load in Deep Drawing
7.2 FEM Analysis of Punch Load in Deep Drawing
7.3 Effect of Friction Behavior on Formability in Deep Drawing
8. Tribological Numerical Modeling in Sheet Drawing
8.1 Coefficient of Friction
8.2 New Coefficient of Friction
8.3 Tribological Numerical Modeling for Coefficient of Friction in Sheet Drawing
8.4 Tribological Numerical Modeling in Sheet Drawing
8.5 Numerical Calculation of Coefficient of Friction
9．Simulation of Seizure in Sheet Metal Forming9.1 Simulation of Seizure in Flat Sliding Test
9.2 Simulation of Seizure in Repeatedly Flat Sliding Test
9.3 Simulation of Seizure in Ironing10. Lubrication in Hot Stamping
10.1 Development of Tribo-Simulator for Lubrication in Hot Stamping
10.2 Lubrication in Hot Stamping of Aluminum-Coated 22MnB5 Steel
10.3 Friction Behavior in Hot Stamping of AA7075 Aluminum Alloy
外文書商品之書封，為出版社提供之樣本。實際出貨商品，以出版社所提供之現有版本為主。部份書籍，因出版社供應狀況特殊，匯率將依實際狀況做調整。
無庫存之商品，在您完成訂單程序之後，將以空運的方式為你下單調貨。為了縮短等待的時間，建議您將外文書與其他商品分開下單，以獲得最快的取貨速度，平均調貨時間為1~2個月。
為了保護您的權益，「三民網路書店」提供會員七日商品鑑賞期(收到商品為起始日)。
若要辦理退貨，請在商品鑑賞期內寄回，且商品必須是全新狀態與完整包裝(商品、附件、發票、隨貨贈品等)否則恕不接受退貨。
