滿額折
Creo Parametric 10.0: Sheet Metal Design
商品資訊
ISBN13：9781962037143
出版社：ASCENT CTR FOR TECHNICAL KNOWL
作者：Ascent - Center for Technical Knowledge
出版日：2024/02/14
裝訂：平裝
規格：23.5cm*19.1cm*2.5cm (高/寬/厚)
定價
：NT$ 4080 元若需訂購本書，請電洽客服 02-25006600[分機130、131]。
商品簡介
商品簡介
The Creo Parametric 10.0: Sheet Metal Design guide enables you to use your introductory modeling skills to create sheet metal models, including walls, bends, notches, and form features. On completion of this guide, you will have acquired the skills to confidently manipulate sheet metal geometry, adjust bend developed lengths, and convert solid parts.
This guide was developed against Creo Parametric 10.0.3.0.
Topics Covered
- The sheet metal environment
- Primary and secondary walls
- Bend relief
- Corner relief
- Regular unbends, back bends, and cuts
- Notches and punches
- Bend features
- Unbending complex geometry
- Sheet metal forms
- Documenting a sheet metal part
- Converting solid parts
- Sheet metal setup
- Investigating a sheet metal part
Prerequisites
- Access to the Creo Parametric 10.0 software. The practices and files included with this guide might not be compatible with prior versions. Practice files included with this guide are compatible with the commercial version of the software, but not the student edition.
- Completion of the Creo Parametric: Introduction to Solid Modeling guide, or similar levels of prior experience using the Creo Parametric software.
購物須知
外文書商品之書封，為出版社提供之樣本。實際出貨商品，以出版社所提供之現有版本為主。部份書籍，因出版社供應狀況特殊，匯率將依實際狀況做調整。
無庫存之商品，在您完成訂單程序之後，將以空運的方式為你下單調貨。為了縮短等待的時間，建議您將外文書與其他商品分開下單，以獲得最快的取貨速度，平均調貨時間為1~2個月。
為了保護您的權益，「三民網路書店」提供會員七日商品鑑賞期(收到商品為起始日)。
若要辦理退貨，請在商品鑑賞期內寄回，且商品必須是全新狀態與完整包裝(商品、附件、發票、隨貨贈品等)否則恕不接受退貨。