混凝土結構基本原理（雙語教材）（簡體書）

This book is based on the newly reviewed code in China “Code for design of
concrete structure” (GB50010—2002) and the teaching program for civil engineer
ing. It containts:mechanical properties of reinforced concrete materials,basic p
rinciples for the design of reinforced concrete structures,flexural strength of
members,shear strength of members,torsional strength of members,compressive stre
ngth of members,tensile strength of members,crack and deflection control of rein
forced concrete members and prestressed concrete members. The velevant introduct
ion in Chinese is attached at the end of the book.
The book can not only be served as bilingual textbook of “Concrete Structur
al Fundamentals” for university and college students of civil engineering,but b
ook may be also served as a reference for technicians,researchers and foreign st
udents of civil engineering.

Chapter 1 Introduction
1.1 Basic Concepts and Characteristics of Reinforced Concrete
1.2 Historical Development of Concrete Structure
1.3 Special Features of the Course
Chapter 2 Mechanical Properties of Reinforced Concrete Materials
2.1 Steel Reinforcement
2.2 Concrete
2.3 Bond Between Concrete and Reinforcement
Chapter 3 Basic Principles for the Design of Reinforced Concrete Structures
3.1 Introduction to the Limit State Design
3.2 Analysis of Structural Resistance
3.3 The Current Chinese Code Practice
Chapter 4 Flexural Strength of Members
4.1 Introduction
4.2 Experimental Phenomena of Reinforced Concrete Beams under Flexure
4.3 Basic Assumptions
4.4 The Equivalent Stress Block
4.5 Balanced Section
4.6 Analysis of a Singly Reinforced Rectangular Beam
4.7 Analysis of Doubly Reinforced Rectangular Beams
4.8 Analysis of T-section and Ⅰ-section Beams
4.9 Detailing Requirements for Sections
Chapter 5 Shear Strength of Members
5.1 Introduction
5.2 The Mechanism of Shear Resistance in Reinforced Concrete Beams without Web
Reinforcement
5.3 The Mechanism of Shear Resistance in Reinforced Concrete Beams with Web Rei
nforcement
5.4 Factors Affecting the Strength of Diagonal Section
5.5 Strength Calculation Methods of Members under Shear
5.6 Shear Reinforcement Design Procedures
5.7 Detailing Requirements for Reinforcement
Chapter 6 Torsional Strength of Members
6.1 Introduction
6.2 The Cracking Torque Tcr
6.3 Ultimate Strength of Members with Pure Torsion
6.4 Strength of Members under Combined Torsion and Shear
6.5 Strength of Members under Combined Torsion,Shear and Flexure
6.6 Detailing Requirements for Members under Shear and Torsion
Chapter 7 Compressive Strength of Members
7.1 Introduction
7.2 Strength of Axially Loaded Members
7.3 Strength of Eccentrically Loaded Members
7.4 Biaxial Eccentrically Loaded Members
7.5 Shear Strength of Member with Compression
7.6 Detailing Requirements for Compression Members
Chapter 8 Tensile Strength of Members
8.1 Introduction
8.2 Strength of Members with Axial Tension
8.3 Strength of Members with Eccentric Tension
8.4 Shear Strength of Members with Tension
Chapter 9 Crack and Deflection Control of Reinforced Concrete Members
9.1 Introduction
9.2 Cracking Strength of a Member
9.3 Control of Crack Width
9.4 Deflection of a Member
Chapter 10 Prestressed Concrete Members
10.1 Basic Concept of Prestressing
10.2 Method of Prestressing Concrete
10.3 Materials of Prestressed Concrete
10.4 The Control Stress and the Losses of Prestress
10.5 Transmission Length of Prestress
10.6 Local Bearing of Concrete under Anchorage
10.7 Prestressed Concrete Axial Tension Members
10.8 Prestressed Concrete Bending Members
Appendix
Reference
《混凝土結構基本原理》中文說明
1 緒論
2 鋼筋混凝土材料的力學性能
3 鋼筋混凝土結構設計的基本原則
4 構件的受彎承載力
5 構件的受剪承載力
6 構件的受扭承載力
7 構件的受壓承載力
8 構件的受拉承載力
9 鋼筋混凝土構件裂縫與變形控制
10 預應力混凝土構件