The AMERICAN INSTITUTE OF CHEMICAL ENGINEERS (AIChE) is a distinguished professional association that strives to provide leadership in the advancing chemical engineering profession. The Equipment Testing Procedures Committee is composed of engineers with substantial experience in the design and operation of process plants, as well as in solving problems that can arise with the equipment used in these plants.
100.0 Purpose and Scope.
101.0 Purpose.
102.0 Scope.
103.0 Liability.
200.0 Definition and Description of Terms.
201.0 Introduction.
202.0 Mixing Equipment.
202.1 Equipment Configuration.
202.2 Impellers.
202.3 Vessels.
202.4 Auxiliary Equipment.
203.0 Basic Nomenclature.
203.1 Equipment Variables.
203.2 Mixing Related Dimensionless Groups.
203.3 Process Related Dimensionless Groups.
204.0 Operating Conditions.
205.0 Types of Tests.
205.1 Operating Performance.
205.2 Mechanical Conditions.
205.3 Mechanical Operation.
205.4 Mixer Support Structure.
205.5 Process Conditions.
206.0 Performance Criteria.
300.0 Test Planning.
301.0 Preliminary Considerations.
301.1 Safety.
301.2 Environmental.
301.3 Test Objectives.
301.4 Multiple Applications.
302.0 Plans for Operating Tests.
302.1 Speed.
302.2 Power.
302.3 Torque.
303.0 Plans for Mechanical Condition Tests.
303.1 Equipment Verification.
303.2 Alignment.
303.3 Runout.
303.4 Gear Tooth Contact.
303.5 Seals.
303.6 Auxiliary Equipment.
303.7 Vibration.
303.8 Noise.
304.0 Plans for Mechanical Operation Tests.
305.0 Plans for Process Condition Tests.
305.1 Miscible Liquid Blending.
305.2 Heat Transfer.
305.3 Immiscible Liquid Dispersion.
305.4 Solids Suspension in Liquid.
305.5 Gas-Liquid Dispersion.
305.6 Variable Conditions.
305.7 Other Measurable Results.
306.0 Performance Criteria.
400.0 Measurement Methods & Instruments.
401.0 Introduction.
402.0 Operating Performance Measurements.
402.1 Speed.
402.2 Power.
402.3 Torque.
403.0 Mechanical Condition Measurements.
403.1 Alignment and Adjustment.
403.2 Runout.
403.3 Gear Tooth Contact Pattern.
403.4 Seals.
403.5 Auxiliary Equipment.
403.6 Vibration.
403.7 Noise.
403.8 Temperature.
404.0 Mechanical Operation Measurements.
404.1 Natural Frequency.
404.2 Shaft Strain.
404.3 Deflection.
404.4 Spectral Analysis.
405.0 Process Condition Measurements.
405.1 Density or Specific Gravity.
405.2 Viscosity.
405.3 Physical State.
405.4 Chemical Composition.
405.5 Other Physical/Chemical Properties.
406.0 System Operating Conditions.
406.1 Temperature.
406.2 Pressure.
406.3 Liquid Level, Volume, and Flow.
406.4 Phase Ratios.
406.5 Blend Time.
406.6 Sampling.
500.0 Test Procedures.
501.0 General Test Procedures.
502.0 Preliminary Operation and Safety.
502.1 Instruction Manuals.
502.2 Check for Debris in Vessel.
502.3 Check for Obstructions.
502.4 Pre-Operational Check.
502.5 Hand Turning.
502.6 Jog.
502.7 Hydrostatic Pressure Tests.
502.8 System Test in Air.
502.9 System Water Test.
503.0 Operating Performance Tests.
503.1 Speed.
503.2 Power.
503.3 Torque.
504.0 Mechanical Condition Tests.
504.1 Alignment and Adjustments.
504.2 Runout.
504.3 Gear Tooth Contact Patterns.
504.4 Seals.
504.5 Auxiliary Equipment.
504.6 Vibration.
504.7 Noise.
504.8 Temperature.
505.0 Mechanical Operation Tests.
505.1 Natural Frequency.
505.2 Deflections of Structure.
506.0 Process Condition Tests.
506.1 Blending.
506.2 Heat Transfer.
506.3 Immiscible Liquids Dispersion.
506.4 Liquid-Solid Contacting.
506.5 Liquid-Gas Contacting.
506.6 Liquid-Gas-Solid Tests.
506.7 Other Tests.
600.0 Computation of Results.
601.0 Data Requirements.
601.1 Dimensional Measurements.
601.2 Operating Conditions.
601.3 Process Properties.
602.0 Fundamental Calculations.
602.1 Reynolds Number.
602.2 Power Number.
602.3 Torque.
603.0 Operating Performance Calculations.
603.1 Power.
603.2 Torque.
604.0 Mechanical Condition Calculations.
605.0 Mechanical Operation Calculations.
605.1 Natural Frequency.
605.2 Deflection.
606.0 Process Condition Calculations.
606.1 Blending.
606.2 Heat Transfer.
606.3 Immiscible Liquid Dispersion.
606.4 Liquid-Solid Contacting.
606.5 Liquid-Gas Contacting.
606.6 Other Tests.
700.0 Interpretation of Results.
701.0 Introduction.
702.0 Interpretation of Operating Performance.
702.1 Speed.
702.2 Power.
702.3 Torque.
703.0 Interpretation of Mechanical Conditions.
703.1 Alignment and Adjustments.
703.2 Runout.
703.3 Gear Tooth Contact Patterns.
703.4 Seals.
703.5 Auxiliary Equipment.
703.6 Vibration.
703.7 Noise.
703.8 Temperature.
703.9 Water Power and Corrections.
704.0 Interpretation of Mechanical Operation.
704.1 Natural Frequency Vibrations.
704.2 Deflection.
705.0 Interpretation of Process Conditions.
705.1 Blending.
705.2 Heat Transfer.
705.3 Immiscible-Liquid Contacting.
705.4 Liquid-Solid Contacting.
705.5 Liquid-Gas Contacting.
706.0 Other Tests.
707.0 Sources of Error.
708.0 Computer Modeling.
800.0 Appendix.
801.0 Trouble Shooting Checklist.
802.0 Glossary.
803.0 Notation.
803.1 Greek Letters.
803.2 Dimensionless Groups.
804.0 Equations and Related Groups.
804.1 Impeller Flow.
804.2 Power and Pumping Numbers.
805.0 Calculation Examples.
805.1 Power.
805.2 Mechanical.
805.3 Liquid-Solid.
806.0 Sample Log Sheet.
806.1 System Test Log.
806.2 Physical Description Sketch.
806.3 General Process Log.
807.0 Scale-Up/Scale-Down.
807.1 Geometric Similarity.
807.2 Scale Parameter.
807.3 Correlating Process Parameters.
807.4 Correlating Process Parameters.
807.5 Mixing Correlation.
808.0 References.
Index.
外文書商品之書封，為出版社提供之樣本。實際出貨商品，以出版社所提供之現有版本為主。部份書籍，因出版社供應狀況特殊，匯率將依實際狀況做調整。
無庫存之商品，在您完成訂單程序之後，將以空運的方式為你下單調貨。為了縮短等待的時間，建議您將外文書與其他商品分開下單，以獲得最快的取貨速度，平均調貨時間為1~2個月。
為了保護您的權益，「三民網路書店」提供會員七日商品鑑賞期(收到商品為起始日)。
若要辦理退貨，請在商品鑑賞期內寄回，且商品必須是全新狀態與完整包裝(商品、附件、發票、隨貨贈品等)否則恕不接受退貨。
